Home › Commercial Cabinet Refacing and Repair
We handle commercial cabinet repair in Denver, CO to extend the life of existing millwork. Refacing, hinge replacement, drawer repairs, and laminate fixes can refresh lobbies, offices, and retail fixtures without full replacement. Work is planned to minimize disruption to daily operations while restoring a professional appearance.
Signature Cabinets Denver provides professional commercial cabinet repair throughout Denver, CO, Colorado and the surrounding area. Our licensed, insured crew delivers safe, clean, on-time work with a free estimate before anything begins. Call (720) 807-6608 or request your free quote.
Commercial cabinet refacing and repair for Denver businesses
If you manage a business in Denver, you already know your cabinets take a beating. Between snow tracked in from the parking lot, dust from nearby construction, and constant use by staff and customers, commercial cabinetry wears out faster than most people expect. Signature Cabinets Denver focuses on commercial cabinet refacing and repair that keeps your space working, up to code, and presentable without a full tear out.
We work in offices, medical and dental practices, restaurants, multifamily common areas, schools, and retail spaces across Denver, Lakewood, Aurora, Englewood, and the Tech Center. Our crews are used to working around open businesses, so we plan our work in phases, isolate dust, and schedule noisy tasks for off hours when possible.
Most of our commercial clients are trying to solve one or more of these problems: doors that will not close, sagging or broken hinges, chipped laminate, swollen particleboard from past plumbing leaks, drawers that stick, and cabinets that look dated compared to the rest of a recent remodel. Our goal is to extend the life of the boxes you already paid for and make them look and function like new, without disrupting your operation more than necessary.
How our commercial cabinet repair process actually works
When you call Signature Cabinets Denver about commercial cabinet repair, we start with a walk through of your space. We measure runs of cabinets, check clearances around appliances and equipment, and look at the condition of the boxes, backs, and toe kicks. In older Denver buildings, especially along Colfax and downtown, we often find cabinets that were built in place, so we check how they are tied into the walls and floors before proposing any changes.
Next, we separate structural problems from cosmetic ones. Structural repair might include reattaching loose cabinets to the wall studs, rebuilding water damaged bottoms under sinks, replacing broken drawer boxes, or reinforcing long countertop spans so they no longer flex. Cosmetic repair covers things like repairing chipped laminate, filling and refinishing gouges, and replacing hardware that has lost its finish. On many projects we handle both at the same time.
We then talk through your schedule and business hours. Restaurant and medical clients often prefer evening or weekend work, while offices may allow weekday work in certain rooms as long as conference rooms, reception, or restrooms remain available. We phase the job so that critical areas like nurse stations, front desks, and break rooms stay usable every day. We also coordinate with your janitorial service or building management so everyone knows what areas will be taped off.
Before we start, you get a written scope that lists which cabinets will be repaired, what will be refaced, what gets replaced, and where any new boxes or modifications will be built. This keeps surprises low and lets you budget around the work instead of guessing what might be opened up later.
Refacing options, materials, and finishes that hold up in commercial use
Commercial cabinet refacing is different from a simple home makeover. Your cabinets see heavier traffic, cleaning chemicals, and sometimes health or building inspections. Signature Cabinets Denver steers clients toward finishes and materials that handle this kind of use.
For refacing, we typically install new doors and drawer fronts, then apply matching veneer or laminate skins to the visible faces of the existing boxes. In break rooms and office kitchens, we often recommend high pressure laminate (HPL) doors and faces because they stand up well to repeated cleaning with commercial products and resist staining from coffee, sauces, and markers. In medical, dental, and lab environments, we often specify seamless HPL or thermofoil-style fronts with soft edges that wipe clean easily and do not trap debris.
In reception areas, law offices, and higher end retail, many Denver clients want a wood look that still holds up to daily cleaning. For those spaces we use either real wood veneer on durable core panels or textured melamine that mimics wood grain while resisting scratching. We review specific samples on site so you can see how finishes look under your actual lighting.
Hardware upgrades are a big part of commercial cabinet refacing. Heavy use demands soft close, full extension drawer slides and hinges rated for frequent opening. We use commercial grade hinges and slides that can be adjusted after installation, which is helpful in older Denver buildings where floors are not perfectly level. We also install ADA compliant pulls and handles when needed, selecting shapes that staff with limited grip strength can use easily.
If you have fire code or health department requirements, we look at those before recommending materials. For example, some downtown office towers and healthcare facilities require that cabinet materials meet specific fire rating standards. We work with suppliers that can provide documentation for those products so you can pass inspections without scrambling at the last minute.
Cost drivers, common problems, and what Denver owners should decide early
Commercial cabinet repair and refacing costs depend on a handful of practical factors. The biggest drivers are the number of cabinets and drawers, whether the boxes are structurally sound, the type of finishing material you choose, and how much after hours work is needed.
A straightforward office kitchen with solid boxes and mostly cosmetic updates might involve new doors and drawer fronts, new hardware, and minor repairs to boxes. That type of project often costs less than a full replacement and can be completed in phases so staff can keep using sinks and appliances. On the other hand, a restaurant line that has seen years of moisture, steam, and heavy impact may need many box bottoms rebuilt, metal corner protection, and higher grade laminates that resist heat and cleaning chemicals. That kind of repair takes more time and materials and is priced accordingly.
Water damage is one of the most common issues we see along the Front Range. Old supply lines under sinks, past dishwasher leaks, and condensation around coolers often swell and crumble the bottom panels of cabinets. In those cases, Signature Cabinets Denver cuts out damaged sections, installs new moisture resistant panels, and ties them back into the existing framework. We also recommend simple preventative steps, such as adding waterproof underlayment under sinks and using metal or PVC legs instead of direct wood contact with concrete floors in basements and ground level tenant spaces.
Another recurring problem in Denver is cabinet movement caused by building settling and freeze thaw cycles. In older brick and mid century buildings, we find upper cabinets that are pulling away from the walls. We reanchor those using modern fasteners into solid backing or install new cleats and spreader blocks, then adjust the doors so they line up again. This type of repair costs far less than ripping out and rebuilding entire runs of cabinets.
Before you hire any cabinet company, decide what matters most: downtime, durability, or appearance. Some clients want the space to look perfect for customers, even if it means working several weekends in a row. Others prioritize getting durable finishes installed quickly in staff-only areas. Having that priority clear up front helps us suggest the right balance of refacing, repair, and selective replacement instead of pushing you to replace everything.
Why Denver businesses choose Signature Cabinets Denver and how to get started
Signature Cabinets Denver works almost exclusively in the Denver metro area, so we understand local building ages, landlord expectations, and inspection requirements. We know what property managers along the I 25 corridor typically allow, how to work within HOA rules in mixed use buildings, and how to coordinate with downtown building engineering teams on loading dock access and elevator use.
Our crews are cabinet specialists, not general handymen. They bring commercial grade tools, dust control equipment, and portable workstations so we can cut, drill, and finish as much as possible away from your public spaces. When needed, we stage materials in unused suites or back corridors so we are not clogging your reception area with doors and panels.
On a typical project, here is what to expect:
1) Initial call and site visit. You walk us through the problems, we inspect the cabinets, discuss code or landlord requirements, and take measurements.
2) Written proposal. You receive a clear scope of work that separates repair from refacing and lists the specific hardware and materials we plan to use, along with a projected timeline that respects your business hours.
3) Material selection. We bring physical samples, or you can visit our shop to see options for laminates, veneers, and hardware that are appropriate for commercial cabinet repair and refacing.
4) Scheduling and phasing. We coordinate with you to set phases, identify critical areas that must stay operational, and plan any evening or weekend shifts.
5) Installation and cleanup. Crews perform structural repairs first, then reface and install hardware, checking door and drawer adjustments before we leave each day. We remove debris daily and leave work areas usable.
If you are unsure whether your cabinets can be salvaged or need full replacement, we are honest about that during the first visit. Our goal is to keep as much of your existing infrastructure as possible, but not at the expense of safety or long term durability.
